We were contacted by an existing client who lives in the lovely Cheshire village of Church Minshull regarding a Brick tiled floor. We had already worked on restoring floors at their property before and on this occasion, they wanted us to improve the appearance of the bricks that comprised the floor in their old wash house.

Brick Tiled Kitchen Floor Before Cleaning Church Minshull

Like the village in which it’s situated the property was pretty old, and they were not sure when the floor had been laid. You can see from the photographs however it was stained, dull and now well overdue a facelift. Having used our services previously, they knew how we worked and were happy with the quote which would take two days to complete. Although it wasn’t a particularly large floor it was an awkward shape, tight to work in and would result a lot of manual work.

The village of Church Minshull is approximately 5 miles north west of Crewe, just West of the River Weaver and Shropshire Union Canal. The modern village centre is a designated conservation area which contains many houses of Tudor style architecture so it really is a lovely place to visit and to work in.

Cleaning a Brick Tiled Kitchen Floor

The first task was to give the floor a good sweep to remove any debris. After this I applied a strong dilution of Tile Doctor Pro-Clean which is a high alkaline cleaner/coatings striper and left it to soak in. This product gets to work on ingrained dirt and grime as well as removing any existing sealers.

The solution was left to dwell on the brick floor for about twenty minutes before being scrubbed in with a Black pad fitted to a slow speed rotary machine and by hand. This process lifted the dirt out of the brick nicely and the resultant slurry was then removed with assistance of a wet vacuum.

After rinsing the remaining residue off the floor, it was given a thorough inspection. I noticed there were a few stubborn areas so the process was repeated until I was satisfied the floor could be as clean as it possible could be. After a final rinse with water the floor was dried as much as possible with the wet vacuum and left to dry off fully overnight.

Sealing a Brick Tiled Kitchen Floor

The next morning, I was on site early and the first job was to test the floor with a damp meter to make sure it was dry enough to start sealing. The results were good, so I set about sealing the brick floor starting with a single coat of Tile Doctor Colour Grow which is an impregnating sealer that enhances colour. Once this had dried, I applied four further coats of Tile Doctor Seal and Go Extra which adds a subtle sheen that enhances the appearance of the old bricks even further.

Old floors like this don’t have a damp-proof membrane under the floor so it’s important to use breathable sealers that allow the moisture to rise through the brick and evaporate. Using a non-breathable sealer could lead to damp building up below the floor where it can spread to the walls and cause rising damp.

Brick Tiled Kitchen Floor After Cleaning Church Minshull

The floor looked much healthier after I had finished, and the new sealer will make it so much easier to keep clean going forward. For aftercare I recommended they use Tile Doctor Neutral Tile Cleaner to maintain the floor. It’s a pH neutral product which won’t prematurely erode the sealer like some of the stronger tile cleaning products you find in supermarkets which are only for use on Ceramic tiles and Vinyl flooring. It comes in a concentrate, so you only need to dilute a small amount in a bucket of warm water.


Source: Professional Restoration of a Brick Tiled Floor in Cheshire